Catalog No. : NOVA-4202-07

NEXTflex™ 16S V1 - V3 Amplicon-Seq Kit  (Barcodes 289 - 384)

NEXTflex™ 16S V1 - V3 Amplicon-Seq Kit (Barcodes 289 - 384)


16S rRNA Sequencing
16S ribosomal RNA (rRNA) sequencing is an amplicon sequencing technique used to identify and compare species of bacteria present within a given sample. 16S rRNA gene sequencing is used to study phylogeny and taxonomy of samples from complex microbiomes or environments that are difficult or impossible to study. 16S rRNA sequencing can be used to specify taxonomic assignments, down to the species level. Bioo Scientific offers NEXTflex® 16S Amplicon-Seq Kits for this purpose, which are optimized library prep kits developed to simplify 16S rRNA sequencing on the Illumina® MiSeq® sequencing platform. Automation protocols are also now available for the PerkinElmer Sciclone NGS and NGSx Workstation.

Culture-free Identification of Bacteria
The NEXTflex 16S Amplicon-Seq Kits enable analysis of the entire microbial community within a sample, without bias introduced by the culturing required for other, non-NGS based, 16S rRNA analysis methods. With the ability to multiplex hundreds of samples in a sequencing run, NGS-based 16S rRNA sequencing is a sensitive and cost-effective technique to identify strains that may not be identified using other methods.

  • Optimized protocol offers lower PCR bias and fewer off-target reads
  • Fast library prep protocol
  • Low input – As low as 1 ng of genomic DNA
  • Flexible barcode options– Up to 384 unique barcodes available for multiplexing of libraries
  • Does not require custom sequencing primers
  • Automation protocols are now available for the PerkinElmer Sciclone NGS and NGSx Workstation to automate your 16S sequencing
  • Functionally validated on the Illumina® MiSeq® sequencer
 The NEXTflex™ 16S V1 - V3 Amplicon-Seq Library Prep Kit is designed for the preparation of multiplexed amplicon libraries that span the hypervariable domains one through three (V1-V3) of microbial 16S ribosomal RNA (rRNA) genes. These libraries are compatible with paired-end sequencing on the Illumina® MiSeq® sequencing platform.

Fast Library Prep Protocol
There are two main steps involved in 16S V1-V3 amplicon processing: an initial PCR amplification using customized PCR primers that target the V1-V3 domains, and a subsequent PCR amplification that integrates relevant flow cell binding domains and unique 12 base pair sample indices. The limited number of cleanup steps ensures maximum recovery of amplicons for downstream sequencing.

Optimized Protocol Offers Lower PCR Bias and Fewer Off-target Reads
The protocol incorporated in the NEXTflex 16S V1 - V3 Amplicon-Seq Kit offers better sequencing results than can be obtained using traditional 16S sequencing protocols. The incorporation of the second PCR step in the protocol for the addition of the sample-specific index reduces the number of off-target reads typically encountered during amplicon sequencing.

Selected Publications that Reference using the NEXTflex 16S V1 – V3 Amplicon-Seq Kit:
Maiuri, A. R., et al. (2017) Mismatch Repair Proteins Initiate Epigenetic Alterations during Inflammation-Driven Tumorigenesis. Cancer Research, 77(13), 3467-3478. doi:10.1158/0008-5472.can-17-0056.

Quereda, J. J., et al. (2016) Bacteriocin from epidemic Listeria strains alters the host intestinal microbiota to favor infection. PNAS. doi:10.1073/pnas.1523899113.

Ranjan, R., Rani, A., Metwally, A., McGee, H. S. and Perkins D. L. (2015) Analysis of the microbiome: Advantages of whole genome shotgun versus 16S amplicon sequencing. Biochem Biophy Res Com. doi:10.1016/j.bbrc.2015.12.083.

Yao, J. et al. (2016) A Pathogen-Selective Antibiotic Minimizes Disturbance to the Microbiome. Antimicrob. Agents Chemother. 00535-16. doi:10.1128/AAC.00535-16.
ItemSize Application Price
NEXTflex™ 16S V1 - V3 Amplicon-Seq Kit (Barcodes 289 - 384)

192 rxns

Next Gen Sequencing Automation $4,601.30

Microbial 16S Metagenomics Studies:

  • Bacterial diversity studies
  • Studies of interactions between host species and bacterial communities
  • Identification of non-culturable bacteria
  • Detection of adventitious agents
  • Enzyme discovery and production

Researchers interested in additional multiplexing capabilities should contact 

Kit Specs

The NEXTflex 16S V1 -V3 Amplicon-Seq Kit contains enough material to prepare 8, 24, 96 or 192 amplicon-seq libraries from genomic DNA for Illumina® sequencing. The shelf life of all reagents is 12 months when stored properly. All components can be safely stored at -20°C. This kit is shipped on dry ice.

NEXTflex™ 16S V1 - V3 Amplicon-Seq Kit Protocol

Kit Contents

  • NEXTflex™ PCR Master Mix
  • NEXTflex™ 16S V1-V3 PCR I Primer Mix
  • NEXTflex™ PCR II Barcoded Primer Mix
  • Resuspension Buffer
  • Nuclease-free Water

Required Materials Not Provided

  • 1 ng - 50 ng high-quality genomic DNA in up to 36 µL nuclease-free water for each library
  • 96 well PCR Plate Non-skirted (Phenix Research, Cat # MPS-499) or similar
  • Adhesive PCR Plate Seal (Bio-Rad®, Cat # MSB1001)
  • Agencourt® AMPure® XP 5 mL (Beckman Coulter® Genomics, Cat # A63880)
  • Magnetic Stand - 96 (Thermo Fisher Scientific®, Cat # AM10027) or similar
  • Thermocycler
  • 2, 10, 20, 200 and 1000 µL pipettes / multichannel pipettes
  • Nuclease-free barrier pipette tips
  • Vortex
  • 80% Ethanol, freshly prepared (room temperature)

16S rRNA Amplicon Sequencing Offers Enhanced Metagenomic Detection

The NEXTflex™ 16S V1-V3 Amplicon-Seq Kit and Illumina® MiSeq® 2x300 read chemistry allow for genus-level identification


Before the development of high-throughput methods to identify and characterize microbial populations, our understanding of the role microbes play in environmental, agricultural, and health-related settings was limited. The application of next generation sequencing (NGS) has provided an unprecedented ability to identify and categorize microbial taxonomy. Determining the complexity of species present in a sample can be achieved by sequencing a genomic region, conserved in all species, that contains evolutionarily divergent sequences that allow identification of unique taxa. A commonly used phylogenetic marker in metagenomics is the 16S ribosomal RNA (rRNA) gene. This ubiquitous locus is comprised of highly conserved regions flanking nine hyper-variable regions, referred to as V1-V9 (Figure 1). Here we demonstrate the utility of the NEXTflex™ 16S V1-V3 Amplicon-Seq Kit combined with the longer read chemistry of Illumina MiSeq (2x300) for enabling accurate identification of genera present in highly complex microbial communities across a vast number of samples.

Figure 1. Schematic representing conserved and hyper-variable regions of the 16S rRNA gene.


DNA Isolation and Microbiome Enrichment

DNA was isolated from human saliva using the QIAGEN® DNeasy® Blood & Tissue kit with minor modifications (1). Quality and quantity of DNA was assessed by spectrophotometry. DNA extracted from saliva was enriched for microbial DNA, and DNA quantity was determined by fluorometer. 

16S V1-V3 Library Preparation

20 ng of microbial enriched DNA was used as starting material for a NEXTflex 16S V1-V3 Amplicon-Seq library prep. Targeted PCR amplification of the 16S V1-V3 region was performed using the universal primers contained in the kit, which contain library-specific overhangs and are complementary to the conserved domains flanking the hyper-variable regions of interest. After AMPure® XP bead cleanup, a subsequent PCR was performed with an indexing set of primers containing Illumina flow cell binding sites, sequencing primer complementary sequences compatible with paired-end sequencing, and indexing barcodes for high-throughput multiplexing of up to 384 unique libraries (Figure 2).  


Figure 2. NEXTflex 16S V1-V3 Amplicon-Seq Kit workflow.

Sequencing and Data Analysis

Normalized libraries were clustered on-board, and paired-end sequencing was performed on the MiSeq. FASTQ files for each library were submitted to the online metagenomics analysis server, MG-RAST (2). Sequences were quality controlled and filtered before a nucleic acid similarity search against several databases of known 16S rRNA sequences was performed. Organisms detected in the total oral microbiome are shown as percent of reads mapping to genus-specific 16S rRNA references out of the total number of reads passing filter for each oral microbiome library (Figure 3).  


We explored the microbial community composition in human saliva using the NEXTflex 16S V1-V3 Amplicon-Seq Kit. High proportions of the genera Veillonella and Streptococcus were identified (Figure 3). Veillonella requires the presence of Streptococcus to adhere to the oral biofilm (plaque) and prefers lactate, the byproduct of metabolic process of Streptococcus, as its substrate of metabolism (3, 4). The top six genera present in this analysis: Prevotella, Veillonella, Streptococcus, Actinomyces, Fusobacterium and Leptotrichia represent abundant genera present in normal human oral microbiomes (5). Furthermore, the detection of low abundance microbes enables studies examining not only populations, but also active microbial evolution.

As a community composition study, many different 16S rRNA genes were amplified and sequenced, each with highly variable base composition, complexity and GC content (Figure 4). While the 16S rRNA region is not highly GC rich, the robust NEXTflex DNA polymerase used in the 16S V1-V3 Amplicon-Seq kit is able to amplify 45% - 65% GC content across all 16S V1-V3 regions sequenced in this experiment. Finally, the ability to detect a variety of taxa is improved by sequencing the V1-V3 regions in comparison to the V4 region alone.  Using the NEXTflex 16S V1-V3 kit alone or in concert with the NEXTflex™ 16S V4 kit provides users with a time-efficient and robust method to study metagenomics, using any sample from which DNA can be obtained. 

Figure 3. Genus level classification of oral microbiome from saliva sample that was enriched for microbial DNA.

Figure 4. GC content of 16S V1-V3 PCR amplicons sequenced. Y-axis represents number of reads uploaded to MG-RAST before quality control and filtering. X-axis represents percent GC content. Plotted points represent the number of reads within a GC percentage range.


1. Lazarevic et al., Analysis of the salivary microbiome using culture independent techniques. Journal of Clinical Bioinformatics. 2012, 2:4.

2. Meyer et al., The Metagenomics RAST server - A public resource for the automatic phylogenetic and functional analysis of metagenomes. BMC Bioinformatics. 2008, 9:386.

3. Kreth et al., Bacterial and Host Interactions of Oral Streptococci. DNA and Cell Biology. 2009, 28:8.

4. Distler, W., and Kroncke, A. The lactate metabolism of the oral bacterium Veillonella from human saliva. Arch Oral Biology. 1981, 26. 

5. Dewhirst et al., The Human Oral Microbiome. Journal of Bacteriology. 2010, 192:19. 


Outside of novel sequencing technologies that emerge every few years, the ability to multiplex samples is the most critical and revolutionary aspect of next-generation sequencing. Multiplexing allows for acute control of throughput, amplifying the value of obtaining just enough data per sample.

To make multiplexing possible, small arbitrary sequences are incorporated into the sequencing adapters attached to all fragments of a particular sample. These sequences, known as barcodes, allow for post-sequencing processing to bin each fragment by its originating sample.

However, even high-fidelity polymerases used during sequencing reads are invariably prone to introducing errors. These errors are especially costly when landing during the barcode read, preventing proper binning and wasting associated sequencing reads. To alleviate this, the knowledge of bitwise error correction was extended to the base-wise language of sequencing.

The overall ability to correct barcode read errors stems from the differentiability between the entire set of barcodes. Differentiability can be called distance, or the number of single position changes that are required for one barcode sequence to become another. For example, the top sequence in the below figure has only one position change from the middle, while the middle has one position change from the bottom. Overall, the top to bottom sequence requires two position changes. This concept, known as the Hamming distance, is what powers barcode error correction and casual codebreaking games like Mastermind.

The greater the minimum distance separation across an entire barcode set, the stronger the differentiability. This in turn governs how many errors can be error-corrected across a barcode subset. Maximum error correction is governed by the following formula:

where d is the minimum distance across the entire set.

How does minimum distance affect generating barcode sets? By increasing the minimum distance across a subset, the overall maximum subset size decreases. One must set requirements so that sufficient barcodes are within a set of desired error correction.

We have expanded previously available barcode sequence sets in both set size and index lengths to accommodate higher levels of error correction. Also, other factors such as colorspace on Illumina instruments have been considered, leaving customers with a minimal amount of effort in selecting the best subsets for low-diversity sequencing runs.

Our new 12 nt barcode set, available with the NEXTflex™ 16S V1 – V3 Amplicon-Seq Kit, allows for up to two error corrections and has multiple low-diversity pooling options. We will continue to develop new technologies to remain the leader in quality multiplexing options.


Related Products

ItemSizeMakeCatalog No.ApplicationPriceQty
NEXTflex™ 16S V1 - V3 Amplicon-Seq Kit (Barcodes 193 -288)

192 rxns

Bioo Scientific NOVA-4202-06 Next Gen Sequencing
ItemSizeMakeCatalog No.ApplicationPriceQty
NEXTflex™ 16S V4 Amplicon-Seq Kit 2.0 (Barcodes 289 - 384)

192 rxns

Bioo Scientific NOVA-4203-07 Next Gen Sequencing
ItemSizeMakeCatalog No.ApplicationPriceQty
NEXTflex™ 18S ITS Amplicon-Seq Kit (Barcodes 289 - 384)

192 rxns

Bioo Scientific NOVA-4210-07 Next Gen Sequencing